Improvement of physical and mechanical properties of electrospun poly(lactic acid) nanofibrous structures

Iranian Polymer Journal - The electrospinning of stereocomplexed poly(lactic acid) (Sc-PLA) twisted yarns was our approach to produce PLA-based nanofibrous structures with improved physical and...     

A sight on the current nanoparticle-based gene delivery vectors

Nowadays, gene delivery for therapeutic objects is considered one of the most promising strategies to cure both the genetic and acquired diseases of human. The design of efficient gene delivery vectors possessing the high transfection efficiencies and low cytotoxicity is considered the major challenge for delivering a target gene to specific tissues or cells. On this base, the investigations on non-viral gene vectors with the ability to overcome physiological barriers are increasing. Among the non-viral vectors, nanoparticles showed remarkable properties regarding gene delivery such as the ability to target the specific tissue or cells, protect target gene against nuclease degradation, improve DNA stability, and increase the transformation efficiency or safety. This review attempts to represent a current nanoparticle based on its lipid, polymer, hybrid, and inorganic properties. Among them, hybrids, as efficient vectors, are utilized in gene delivery in terms of materials (synthetic or natural), design, and in vitro/in vivo transformation efficiency.     

Microparticles based on hydrophobically modified chitosan as drug carriers

In this work, a hydrophobically modified (HM) chitosan derivative was prepared by covalent linkage of C₁₂ groups to the chitosan backbone. HM‐chitosan microparticles were prepared according to an emulsification‐solvent evaporation method and naltrexone (NTX) was used as a model drug. For comparison, unmodified chitosan and poly lactic‐co‐glycolic acid (PLGA) microparticles were also tested as carriers for NTX. HM‐chitosan formed viscous semi‐dilute solutions, suggesting a high level of chain entanglements and hydrophobic associations. HM‐chitosan microparticles generally showed higher production yield and encapsulation efficiency, as compared with chitosan and PLGA. The burst release shown by chitosan microparticles was significantly reduced when using the HM‐chitosan derivative. An enhanced control of drug release was observed over at least 50 days. PLGA particles demonstrated inferior controlled release properties as compared to HM‐chitosan subsequent to the initial release stage. These results revealed the potential of hydrophobic modification of chitosan as a means to improve the stability and sustained delivery properties of the polymer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40055.     

Microstructural and mechanical assessment of transient liquid phase bonded commercially pure titanium

Diffusion joining of commercially pure titanium was successfully prepared via transient liquid phase bonding in vacuum environment. The process was carried out using AMS 4772 silver-based filler alloy at 900–1000°C for various holding time under the vacuum of 6?×?10^?7?Torr. Optical and scanning electron microscopy equipped with an EDS analyzer was conducted for microstructural evaluations. Mechanical properties were also investigated by shear test, fractographic assessment and X-ray diffraction analyses. The tendency to achieve isothermally solidified joint increased by increasing bonding time. No sign of athermal solidification was detected of sample bonded at 1000°C for 90?min. Consequently, the bonding condition of a high quality joint was obtained. Elemental analyses revealed that filler alloy’s elements (Ag, Cu) distributed more uniformly in fully isothermal solidified bond, whereas the aggregation of these elements is considerable in athermally solidified bond. Shear test results represented that the highest shear strength attributed to the sample bonded in isothermal solidified condition (bonded at 1000°C for 90?min).     

Experimental and analytical study on channel shear connectors in fiber-reinforced concrete

This paper investigates, experimentally and analytically, the capacity of channel shear connectors embedded in normal and polypropylene (PP) concrete. Limited testing is used to assess the accuracy of a proposed nonlinear finite element model for typical push-out test specimens. Using this model, an extensive parametric study is performed to arrive at a prediction for shear capacity of channel connectors in PP concrete. An equation, for inclusion in design codes, is suggested for the shear capacity of these connectors when used in PP concrete.     

Pipe damper,Part I: Experimental and analytical study

In this paper the behavior of steel pipes, filled and unfilled with concrete, is studied under cyclic shear to examine the possibility of their use as a seismic damper. Two specimens of steel pipes filled inside with concrete are tested under monotonic and cyclic shear. Four other specimens of bare steel pipes are tested under fully reversed cyclic shear loading. The results show that the bare steel pipes are capable of absorbing a great amount of energy under a severe cyclic shear loading with a stable hysteretic behavior. This behavior is also simulated using the finite element method. Then, parametric studies are performed to investigate the effects of variations in geometrical properties of the pipe on its hysteretic behavior. A simplified bi-linear model is proposed to approximate the hysteretic behavior of the steel pipe as a metallic-yielding damper.     

Prediction of creep crack growth properties of P91 parent and welded steel using remaining failure strain criteria

Old grades of creep resistant materials such as P11 and P22 have been studied in depth and data and prediction models are available for design and fitness for service assessment of creep rupture, creep crack growth, thermo-mechanical fatigue, etc. However, as the 9%Cr material is relatively new, there is relatively limited data available and understanding with respect to quantifying the effect of variables on life prediction of components fabricated from P91 is more difficult. Since grade P91 steel was introduced in the 1980s as enhanced ferritic steel, it has been used extensively in high temperature headers and steam piping systems in power generating plant. However, evidence from pre-mature weld failures in P91 steel suggests that design standards and guidelines may be non-conservative for P91 welded pressure vessels and piping. Incidences of cracking in P91 welds have been reported in times significantly less than 100,000 h leading to safety and reliability concerns worldwide. This paper provides a review and reanalysis of published information using properties quoted in codes of practice and from recent research data regarding the creep crack growth of P91 steel, and uses existing models to predict its behaviour. Particular areas where existing data are limited in the literature are highlighted. Creep crack growth life is predicted based on short-term uniaxial creep crack growth (CCG) data. Design and assessment challenges that remain in treating P91 weld failures are then addressed in light of the analysis.     

The effect of emulsifiers,sugar, shortening and soya flour on the staling of barbari flat bread

A standard method has been developed to bake barbari flat-type bread. Instron was used to measure the hardness of the crumb of bread samples as a criterion of staling. Different combinations of emulsifiers, sugar, shortening and soya flour were added to the formula of barbari bread to find their effect on the retardation of hardness. Addition of soya flour increased the loaf weight but decreased its total organoleptic score. Added amounts of different additives tried in this experiment improved the hardness approximately to the same level. The best result was obtained by the addition of sodium stearoyl-2-lactylate and shortening.